GeoTech-Pro GSP65L - Petrol garden shredder - Loncin 6.5 HP engine

This GeoTech Pro GSP65L petrol garden shredder allows reducing weeds and twigs in an easy-to-handle and suitable size for composting. Shredding operations also allow reducing the material decomposing time.

The large steel hopper can process even very bulky branches and leaves without having to pre-shred them. Thus, it also features a higher capacity that allows entering a large amount of material at a time.

Maximum cutting diameter: 60 mm

This petrol wood chipper features the quality of large-sized shredders, thus ensuring maximum results in terms of cutting, speed and reliability; The machine is compliant with the CE standards.

Garden shredders intended use:
- The wood chipper must grind only green branches and not dried ones (which would limit its shredding capacity and lead to quick deterioration of the blades);
- The branches must be preferably long, smooth and not knobby (otherwise the cutting diameter would be reduced);
- The branch cutting diameter indicated is the maximum, so it is advised not to shred larger branches. In this case it would be better to purchase a shredder with a larger branch cutting diameter;
- The cutting diameter can vary according to the amounts of wood (e.g: oak, olive, plum and peach are hardwood and can reduce the cutting capacity of the wood chipper);

Features:

Engine model: Loncin

Single cylinder 4-stroke

Forced air-cooled

Cubic capacity: 196 cc

Power: 6.5 Hp

Start system: recoil start

Fuel tank capacity: 3.6 L

Oil tank capacity: 0.6 L

Nominal power: 6.5 Hp
The correct term would be "Commercial” Power, meaning the standard definition used until a few years ago by all well-known engine manufacturers.

* This technical feature is the one indicated in the main sales channels, even if it is higher than the real power of the engine.
Rated power: 5.5 Hp
It refers to the real power of the engine. This is the power indicated as official in the engine instructions manual.

* This technical feature may vary from a an engine model to another according to the rotation speed provided by the manufacturer.

The engine is PROVIDED WITHOUT OIL.
Please carefully read the instructions manual before starting the unit.

The large-sized steel hopper can process very bulky branches and leaves, without having to pre-shred them. Thus, it also features a higher capacity that allows entering a large amount of material at a time.

Focus on the hopper.

Focus on the convenient transport handles on the top of the hopper.

The central rotor is composed of 2 steel flywheels firmly assembled together.

These then represent a sturdy unit (the main component of the garden shredder) of truly superior size, strength and performance.

This rotor is therefore one of the sturdiest and largest rotors on the market.

Equipped with 2 large shredding blades. They pre-shred the wood into the hopper reducing it in coarse wood chips.

Equipped with 8 hardened steel shredding blades (or hammers) rotating at high speed. Thanks to their centrifugal motion they reduce the material in small wood chips.

Provided with counter-blade for high quality shredding results.

The outer shredding chamber is proportionate to the rotor it includes. Large and round-shaped, it guarantees excellent productivity, as well as the durability of the system.

The wood chips are discharged by means the discharge chute equipped with a safety panel that opens autonomously thanks to their push.

The machine structure is 100% made of steel. No plastic has been used.

The machine is equipped with sturdy support feet that keep it steady and stable during shredding operations.

The large pneumatic wheels allows easy transport and storage.

This transmission gives the machine an extraordinary sturdiness, protecting both the motor and the internal shredding rotor from any kind of internal shock or kickback.

In case of a rotor clogging caused, for example, by a too large branch, stones, etc.. there is no risk of breaking the drive shaft and the motor, but the intermediate belt will slip or at least will brake down.

Much longer service life than the standard systems still used by all manufacturers on their petrol-powered models where the engine is directly connected to the shredding unit.

Furthermore, the belt tensioning lever engages and disengages the machine operation.