GeoTech LSP12-100VE - Electric Log Splitter - Vertical - 400V

Description

GeoTech LSP12-100VE three-phase electric log splitter

The GeoTech LSP12-100VE is a vertical log splitter intended for a semi-professional use but also suitable for demanding hobbyists and professional users who are looking for a machine with a good quality-price ratio.

The piston features 4 cm diameter and 1 m length.

The wedge, with its 12 tons splitting force, can split trunks of up to 104 cm length once placed them on the cutting plate. The diameter of the trunks varies from 8 cm to 40 cm.

The piston can be retracted to minimise the space required for storage and makes the transport easier, also thanks to the wheels and transporting handle.

Splitting force: 12 tons

Overall dimensions completely opened: 80x70x230 cm

Overall dimensions when folded: 80x70x150 cm

Weight: 142 KG

GeoTech LSP12-100VE - Electric Log Splitter - Vertical - 400V

Electric motor

This log splitter is powered by a 3500W 400 V three-phase electric motor.

The machine is equipped with a high-performing hydraulic pump that supplies oil (drawn from the tank) to the hydraulic pushing cylinder.

The frame of the machine structure itself acts as the hydraulic oil tank.

Focus on the on/off switch

Wedge and piston

With its 12 tons splitting force, it can split boots with a diameter from 8 cm to 35 cm of up to max. 104 cm height.

The 4 cm piston is able to withstand the 12 tons splitting force of the machine.

Focus on the low down sliding guide of the wedge.

You can disassemble and close the piston to limit the log splitter size for easy storage.

Main features

This log splitter can split trunks of up to max. 104 cm height.

The machine is equipped with 2 side supports that prevent the trunk from falling down during splitting operations. The other side is provided with a convenient trunk-lift system that helps the Operator to place vertically the heaviest trunks.

The log splitter is equipped with wheels for easy transport. 22 cm wheels diameter.

The oil tank is placed at the base of the machine frame and it must be unscrewed to ensure that air escapes from the system during use.

Focus on the transport handle.

Focus on the 2 piston operating levers. The control levers for operating the machine must necessarily be operated by the Operator using both hands, for avoiding any kind of injury.