- Max. flow rate: 160 L/min
- Max. suction depth: 7-8 m
- Clockwise rotation
- Power consumption: 5.5 Hp - 4 kw
- Dimensions: 18 x 22 x 19 cm
- Weight: 11 kg
- Cast iron pump body
- Rotor with nylon rollers
- Cast iron cover
- Chain for securing the pump to the tractor
The difference in diameter between the suction and delivery fitting (30-19 mm) allows different pressures
ML.I. 25 PTO pumps allow you to adjust the outlet flow thanks to the brass pressure adjustment valve.
Through a recirculation system of the liquid that it increases or reduces, it allows:
- vary the flow rate in L per minute of the pump
- vary the pressure
* the other models of Ferroni pumps work with high flow and pressure since they do not have a liquid recirculation valve, therefore pressure and flow rate can only be varied by increasing or reducing the rotation of the power take-off.
Chain with quick fastening carabiner.
It is applied directly to the tractor PTO, by directly inserting the female groove on the male thread of the tractor.
The chain is then fastened to a fixed point on the tractor.
This must be sufficiently taut and fixed to a point in front of it, in such a way as not to allow the pump to slip out of the power take-off
The chart shows the flow rate in L per minute of our tractor-mounted pumps based on the head.
(i.e. the difference in height through which the water is pushed, if necessary, with the hoses that are applied to it).
This information results from a tractor PTO rotation of 540 rpm.
