ML series pumps are self-priming with nylon rollers that are applied directly to the PTO of the tractor or two-wheel tractor, without using the cardan shaft.
The pump can suction liquid by itself, there is no need to fill it before.
It works smoothly even on grounds with high differences in height. It has a maximum head lift of 250 m.
The pump is suitable for irrigation operations (with or without sprinklers) or transferring any non-corrosive liquid (not suitable for wine).
Anchoring chain with quick fastening carabiner.
The diameter difference between the suction and discharge fitting (30-19 mm) allows to set different pressures.
The pump is applied directly to the tractor PTO, by directly inserting the female groove on the male thread of the tractor.
The chain is then secured to the tractor.
It must be sufficiently taut and fixed to a point in front of it, so that the pump cannot slip out of the PTO.
The chart shows the flow rate in L per minute of our tractor-mounted pumps based on the head.
(i.e. the difference in height through which the water is pushed, if necessary, with the hoses that are applied to it)
This information results from a tractor PTO rotation of 540 rpm.
The pump is shipped in its original packaging.
Fittings, chain and user manual are included in the packaging.
To change language, please click on the following abbreviations:
