Dehumidifiers Argo

Argo dehumidifiers reduce excess moisture in domestic environments and collect condensation in a tank. On compatible models, the water can be channelled through a continuous drainage system. They are suitable for bedrooms, living rooms, bathrooms, utility rooms and spaces where steam, drying laundry or poor air circulation can cause condensation and musty odours. Controlling humidity makes the air more comfortable and limits the conditions that encourage mould growth. It does not replace the work required to resolve leaks, rising damp or thermal bridges.

Argo is an Italian brand founded in 1929 in Gallarate, in the province of Varese. Its initial business focused on heating; in the 1960s, the brand introduced its first window air conditioner and, from 1991, developed portable and wall-mounted split air conditioners. As the range expanded, air conditioning, heating and air treatment became complementary areas. The Gallarate production site houses production lines, research and development facilities and quality control; the logistics centre and administrative offices are located in Alfianello. Argo dehumidifiers are designed for anyone seeking appliances for everyday comfort, with electronic controls and features that vary according to the model. At AgriEuro, the available solutions can be compared to find one suited to the room size, humidity level and frequency of operation.

At AgriEuro, Argo dehumidifiers can be selected according to their main technical features, helping customers find the product best suited to their needs. The conditions in the room must also be considered, as the initial temperature and humidity affect the actual amount of condensation extracted.

• Dehumidification capacity: expressed in litres per 24 hours, this indicates the amount of water removed under the stated test conditions. A higher value is more suitable for larger or very humid rooms, but it should always be considered together with the surface area recommended by the manufacturer;
• Humidistat and adjustment: the humidistat detects the relative humidity and allows the desired level to be set, within a range that depends on the model. The electronic control adjusts the operating cycles to the selected value and limits unnecessary start-ups;
• Condensate collection: the built-in tank allows immediate operation, while an alarm signals when it needs to be emptied. On models equipped with a quick connector, continuous drainage channels the water through a hose and is practical during extended operation;
• Air filtration: the dust filter traps particles carried by the airflow and requires regular cleaning. Some versions also feature an activated carbon filter, combining dehumidification with additional filtration;
• Programmes and controls: timer, automatic mode, memory restart and laundry drying functions are available depending on the equipment. Some units also feature Wi-Fi connectivity and app control, allowing settings to be checked and changed remotely;
• Practicality and operating conditions: multidirectional castors and compact dimensions make the appliance easier to move between rooms. The automatic defrost system supports operation within the temperature limits allowed for each model, which should be checked in the relevant technical data sheet.

The range is suitable for domestic, occasional or frequent use, depending on the selected capacity. A compact appliance can serve a bedroom or bathroom; higher-capacity models are more suitable for living rooms, utility rooms and spaces with a greater moisture load. Selection should be based on the model’s technical data sheet and the actual conditions in the room.

Purchasing an Argo dehumidifier from AgriEuro provides access to dedicated services before and after delivery. Logistics availability, technical support and access to spare parts continue to support the product after purchase.

• Fast and free shipping: shipping is handled directly by AgriEuro’s logistics centres, with availability shown on the product page. This structure reduces operational steps and allows the order to be tracked through to delivery;
• Option to order readily available spare parts: after purchase, the personal account provides access to the exploded parts diagram associated with the product, from which the required components can be ordered. The direct link to the purchased model makes it easier to identify the correct part;
• After-sales service: AgriEuro provides attentive, personalised support for technical enquiries after delivery. For repairs under warranty, the product can be collected from the customer’s home and sent to the central workshop or an AgriEuro service centre.

Buy the Argo dehumidifier best suited to your rooms from AgriEuro.

Capacity should be selected by considering litres extracted per 24 hours, room size, temperature and initial humidity. The litres-per-day value is measured under defined test conditions and may be lower in a cooler or less humid room. A lower capacity may be sufficient for a bedroom or bathroom; living rooms, utility rooms and very humid spaces require higher values. The recommended surface area in the technical data sheet is the most immediate reference for comparing Argo models.

The available range depends on the model; several Argo dehumidifiers allow an approximate adjustment from 30% to 80% relative humidity. The humidistat detects the level in the room and adjusts the cycles to approach the selected setting. A moderate target prevents the appliance from remaining active longer than necessary. The value should be selected according to the season, room and presence of condensation, always following the instructions in the manual.

An Argo dehumidifier reduces moisture in the air and can limit the conditions that encourage mould growth, but it does not remove mould that is already present. Nor does it resolve structural causes such as leaks, rising damp or thermal bridges. Contaminated surfaces require appropriate cleaning, and the source of the problem must be identified. Dehumidification therefore supports indoor humidity control but is not a structural solution.

There is no single duration suitable for every room. During the first few days, a very humid room may require extended operation; once the set level has been reached, the humidistat adjusts the cycles according to the detected conditions. Operating time also depends on the appliance capacity, temperature, air circulation and sources of moisture in the room. The humidity indicator should be checked and the instructions for the model followed.

The dehumidifier should be placed on a flat, stable surface, with the air intake and outlet grilles unobstructed. Furniture, curtains and walls positioned too close to the appliance can restrict the airflow and reduce its performance. Minimum clearance distances vary between models and are specified in the manual. Handles and castors, where fitted, can be used to move the appliance between rooms.

During dehumidification, it is preferable to close the doors and windows in the room so that the appliance does not continuously treat new humid air entering from outside. Airing the room remains useful but can be done at a different time. In rooms affected by steam, such as bathrooms and utility rooms, additional moisture emissions should be limited during the cycle. This setup helps the appliance reach the selected level.

The tank is practical for occasional operation and does not require a nearby drain. Continuous drainage is more suitable for long cycles or very humid rooms, as it avoids frequent emptying. The hose must be connected as described in the manual and positioned without bends, following the route required by the drainage system. The availability of the connector and any included accessories should be checked on the product page for the individual Argo dehumidifier.

Yes, Argo models equipped with a laundry drying function can speed up the evaporation of water from fabrics in an enclosed room. The appliance reduces the moisture released by laundry but does not replace a tumble dryer. It should be kept at an appropriate distance from the garments, and the unit’s openings must not be covered. The tank should be checked or continuous drainage set up for extended cycles.

The dust filter should be checked and cleaned at the intervals specified in the manual. Before carrying out maintenance, switch off the appliance and disconnect it from the power supply. A clogged filter restricts airflow and can reduce dehumidification capacity. Additional filters, such as activated carbon filters, may require specific procedures or replacement, so they should not automatically be treated like a standard washable filter.

An Argo dehumidifier is designed to reduce relative humidity, not to air-condition the room. In condensation models, the discharged air may be slightly warmer due to the normal refrigeration cycle and the heat produced during operation. Lower humidity can change the perceived comfort, but the appliance does not replace an air conditioner or heating system. Room temperature is also affected by volume, insulation and cycle duration.