GeoTech-Pro GFM 760 L-E Self-propelled Rough Cut Mower with Hammer Blades

The GeoTech-Pro GFM 760 L-E rough cut mower is a smaller and more compact model compared to competitor products.

Thanks to its innovative design it is easier to operate and to be used on sloping grounds.

Equipped with a powerful Loncin 15HP engine, which gives the machine the right amount of power to work optimally.

The mower is self-propelled. Also, both the handle and the working height are adjustable, to satisfy even the most demanding users.

Besides grass, it can also cut brushwood and brambles (up to 2.5 cm) in any condition, even in fairly inaccessible places (even on slopes, as long as they are not too steep).

Most of the time, this product is used to cut weeds in orchards, vineyards, olive groves (especially for grassing process), or by nurserymen, green operators and public authorities, who use it to clean uncultivated areas.

To make a comparison, we can affirm that this machine offers, without effort, an hourly yield equal to an average of 10 times a normal brush cutter, leaving a much cleaner and smoother result, as well as more finely chopped grass.

NOTICE:
The colour of the cutting plate, the one of the handlebars and of other small details may differ from the colour shown in the picture.
The different colouring is purely aesthetic and does not alter any technical characteristics of the machine.

Main features:

• Model and brand of the engine: Loncin G 420 FD
• Engine type: 4-Stroke
• Cylinder type: Aluminium
• Displacement: 420 cm³
• Power: 15 Hp
• Ignition Type: Electric with key

Focus on the electric starting with key.

Focus on the battery compartment

Focus on air filter

Nominal Power: 15 HP
The correct term would be "Commercial” Power, meaning the classic definition standard of power officially used until a few years ago by all leading engine manufacturers.

* This figure is even more widespread and advertised in the leading commercial channels, although it is higher than the actual power.

Effective power: 12.5 Hp
It corresponds to the real power expressed by the motor shaft. This is the power indicated as official in the manual or in the technical data of the motor manufacturer.

* This technical data may vary for the same engine model depending on the rotational speed supplied by the engine applied to the equipment.

WARNING!

To connect correctly the battery poles (check the photo) first remove the electric starter key, then unscrew the bolt in the green circle and connect the two cables in the black and blue circle together in the green circle bolt, then screw the bolt into the green circle.

4-Speed oil-bath gearbox: 3 forward gears with reverse gear.

The gearbox is very robust and reliable.

Three belt transmission.

Belt drive final transmission towards the rotor protected by a sturdy casing.

Focus on the dashboard with gear selector.

Rough cut mower made of steel sheet.

Sturdy rotor made of tempered steel, with 40 Y-shaped blades. They give this machine unparalleled effectiveness for any type of work (grass but also brushwood, brambles, pruning, up to 2.5 cm in diameter)

Working width: 76 cm

Focus on the blades and their supports.

Cutting height adjustment through handwheel

Focus on the sturdy front stone guards, mounted on a 79 cm swinging bar.

The mower deck is also equipped with an additional protection grid for the user mounted on the top of it. This grid ensures maximum safety of use.

The inner distance of the knife supports is 12mm while the outer distance is 24mm.

Left lever: activates and deactivates the operation, whatever the speed selected on the automatic transmission (forward or reverse). By releasing this lever, the machine stops instantly, for safety reasons.

Right lever: activates and deactivates the blade rotor (i.e. the grinding function) and is connected to the safety disc brake which quickly blocks the rotor when released.

Gear selector

Throttle lever

Lever to lock the piston of the pivoting wheels.

Cutting height adjustment: rotate the lever to raise or lower the cutting deck.

Front tilting steel casing. It automatically lifts if the machine is faced with large amounts of particularly tall and thick grass, so the blades can easily reach and cut the grass.

Tilting front wheels.

TRACTOR pneumatic wheels for large areas: 16 x 6.50 - 8

Stone guard protecting the mower deck