GeoTech SS 680 WL EVO - Petrol Snowplough - Multifunction - Loncin H200

The GeoTech SS 680 WL EVO multi-tool snow blower is fitted with a petrol engine and it features a quick connect-release system for attachments. Suitable for small to medium sized sites. Great grip and adherence to the work surface for perfect results.

This power brush is equipped with a set of tractor style wheels for amazing grip and traction.

Free items:

• 80 cm power brush
• collection box

You can drive the power sweeper thanks to the levers on the control panel.

The operator can reach and operate all of the main controls by standing or walking behind the machine.

This snow blower was designed for removing and throwing snow from sidewalks, gardens, driveways and other ground-level sites.

The snow auger is 50 cm wide and 40 cm tall.

The steel spiral auger features an improved shape and notched edges.

Two-stage system

The snow gets fed into the housing by the ribbon auger and is then discharged through the chute by means of a high-speed internal impeller.

Adjustable plastic skid shoes allow working on all kinds of surfaces, from smooth to rough sites. All you have to do is adjust the skid shoes, and thus, the working height. It can also work over gravel surfaced sites. Because they are made of plastic, skid shoes can be used on any surface and will not scratch it.

The GeoTech SS 680 WL EVO snow blower is equipped with a performing Loncin H200 4-stroke engine, with a maximum power of 6.5 Hp at 3600 revolutions per minute.

196 cc, with overhead valves and air-cooled aluminium cylinder.

Features:

Focus on the engine oil cap

WARNING
The engine is PROVIDED WITHOUT OIL.
Make sure to carefully read the instruction manual before starting the unit.

Nominal Power: 6.5 HP The correct term would be "Commercial” Power, meaning the classic standard of definition of power officially used until a few years ago by all leading engine manufacturers.

* This figure is even more widespread and advertised in the leading commercial channels, although it is a matter that it is higher than the actual power.

Real power: 5.5 HP (a rotation speed of 3600 rpm)
It corresponds to the real power expressed to the crankshaft. This is the power indicated as official in the manual or in the technical data of the motor manufacturer.

* This technical data may vary for the same engine model depending on the rotational speed supplied by the engine applied to the equipment.

This multipurpose self-propelled snow blower features rear-wheel drive and a 7 speed gear shifting system: 5 forward speeds and 2 reverse speeds. The gear shifting lever is placed on the control panel.

The clutch lever is placed on the handle.

Tractor-style drive wheels suitable for snow conditions.

There are two levers on the handles:

One of the two levers egages and disengages motion at any speed, both for forward or reverse gears. The other lever engages and disengages both the snow auger and the high-speed impeller for chute discharge (the lever engages or disengages both stages at the same time).

This multipurpose snow blower features a quick attachment connect-release system. The release pedal on the side makes it very easy to remove and attach accessories.

Focus on the sturdy attachment connector on the machine.

This multi-tool snow blower features a quick-connect system and it comes with two useful attachments.

80 cm brush for sweeping gravel and debris off driveways.

Handy collection box to be attached to the front of the power sweeper. This accessory allows collecting most bits and fragments that get sweeped by the front brush.

You can use this machine to clear debris and dirt from sidewalks, gardens, driveways and other ground-level areas in power sweeper mode.

The sweeper can remove:

• Leaves
• Snow
• Fine dust
• Gravel
• Small fragments

Shovel-shaped clean out tool. If the chute gets clogged, you can easily remove the snow from the chute assembly.

Tractor-style wheels for amazing grip that allow using full engine power. Wheel size: 13x 4.10 - 6.

The snow chute is adjustable and it can be set in many positions. Moreover, the chute features a protection grid to prevent objects from getting in.