BullMach Helios 500 D Tracked Power Barrow - Dumper Hydraulic Barrow 500 Kg

BullMach Helios 500 D tracked power barrow with Dumper barrow with a actual capacity of 500 kg. The robust steel frame and the gearbox with three forward gears and one backward make this tracked power barrow versatile and efficient.

The dumper barrow of this tracked power barrow through its hydraulic circuit allows to perform all the operations of loading and unloading with extreme simplicity. Among the other features of this tracked power barrow it is possible to find its tracks, that ensure stability and safety during use of the machine even with a heavy load and gradients that normal tracked power barrow fail to address.

The frame of the machine is designed and built so as to make it lightweight and robust .

Thanks to the self-propelled on tracks and to the engine of 7 HP and 212 cc of displacement this tracked power barrow is able to carry loads

• Up to a maximum of 500 kg on flat ground
• Up to a maximum of 500 kg of soils that have a maximum slope of 20 ° , Thus being an indispensable tool for each type of transport.

We remind you that it is always good to:
1) check the engine oil level
2) put oil in the filter because it is not present (in case of filter in oil bath)
3) carefully read the instructions manual before carrying out any oil check and topping up operation (the manufacturer can modify the supply modalities specified in the two upper points without any prior notice).

The 170F engine is suitable for works where a great power is required obtained thanks to the high displacement of 212 cc

Features:

Brand new 4-stroke engine overhead valve shaft OHV starting with automatic decompressor.

Easy recoil start thanks to the automatic fuel priming system.

ATTENTION The engine is PROVIDED WITHOUT OIL. Make sure to carefully read the instructions manual before starting the unit.

Cable retainers

Air filter

Barrow in high-strength steel, is reinforced with tubular cross members in the lower part, which make it suitable for any load or impact. The tracked power barrow has an effective capacity of 500 Kg Even on sloping ground.

To facilitate the tilting operation, discharging the weight of the operator, and to keep it in the tilted position the barrow, the tracked power barrow is provided with hydraulic piston placed under the frame.
In this way all the phases of the work will be much facilitated.

Barrow dimensions 1380x830x560 mm

Gearbox : Large, reliable and accurate.

Speed:
3 forward
1 reverse

Parking brakes :
annexes to the gearbox, for greater stability and security.
These are automatically activated to release the command (leaving the car in neutral, even in strong gradient, the machine remains perfectly blocked)

Transmission :
Robust and resistant, it allows to manage the steering acting on the single track deactivating the rotation

The width and profile of the tread guarantee perfect grip and stability on all types of terrain. Made of special reinforced rubber with excellent grip, they are able to tackle any type of surface or step.

Total track width: 180mm

The track at rear angle greater pointy "tank type" allowing him to climb easily even on stairs or other types of obstacles.

Powerful hydraulic circuit characterized by:

- oversized hydraulic pump

- distributor has a lever to start the pump

- sturdy hydraulic cylinder fitted with a blocking valve that ensures the blocking of the tipping in the case of sudden pressure loss

Control: easy to operate and ergonomic, they offer precision and can be controlled in the work

Large black lever for motion activation.

The two lower levers are for the steering, respectively right and left.

Speed regulator

The steering is modulated as a function of the control lever and allows it to move smoothly. By partially pulling one or the other lever also the steering of the affected track, right or left, will be partial.
This allows the steering of the tracked power barrow in an extremely easy way, without causing any sudden movements.

Safety brake that allows the immediate arrest.

Ignition switch;

Gear lever